Filters

(2019) Question 48: What is your experience with carbon on regenerated catalyst levels in partial burn operations?  How do you confirm an optimal level of carbon to ensure desired product yields?  How do metal amounts or feedstock play a role in controlling carbon on regenerated catalyst?

The optimal level of carbon on regenerated catalyst (CRC) is often a balance between conversion and feed rate. Lowering CRC can be achieved by increasing air rate. In FCCs that are air blower or regenerator temperature limited, this can result in a feed rate reduction or residue processing reduction.
Read more

(2019) Question 50: What methods or operating parameters do you use to monitor/diagnose FCCU regenerator air and catalyst maldistribution?  What can be done operationally to mitigate air and catalyst maldistribution?  What mechanical changes have been successful at improving air and catalyst distribution?

Localized regenerator afterburn is a common symptom of non-optimal air and/or spent catalyst distribution. Regional CO bed breakthrough will combust and afterburn in the regenerator dilute phase and cyclones indicating a stochiometric imbalance of air and coke. In a partial combustion operation, localized afterburn confirms confined oxygen breakthrough from the bed resulting in CO combustion in the dilute phase and cyclones.
Read more

(2010) Question 36: What are the best practices for maximizing catalyst run length in NHT units that are limited by reactor pressure drop?

Marathon’s experience with NHT fouling has been primarily corrosion products from upstream units and oxygen related polymerization of the naphtha. The use of feed filters can help minimize the effects of corrosion products. Oxygen related polymerization has impacted our NHT units from air leakage across intermediate naphtha storage tank seals and in purchased naphtha.
Read more

(2010) Question 37: Silicon poisoning of NHT catalysts has been observed in refineries without coking units. In your experience, what are the potential sources of silicon and what are the best practices to manage risk of such poisoning?

Marathon has had to deal with issues of non-coker silicon in naphtha’s since at least 2001. For background purposes, it is Marathon’s experience that silicon blocks the pores on hydrotreating catalyst and can impact catalyst activity. In severe cases, silicon breaks through to the reforming catalyst can occur where it can form silicon dioxide during the regeneration process which can cover the platinum sites.
Read more