Filters

(2016) Question 39: Please summarize the current status of slurry hydrocracking technology commercialization.

Slurry hydrocracking technology has been commercialized in China (VCC) and Italy (EST) in the past two to three years. Both facilities have demonstrated expected performance, including conversion and selectivity. The reliability of slurry hydrocracking is still an open question as these units have only been in operation for a short time. Additional VCC commercial units are scheduled for startup in the next 12 months.
Read more

(2016) Question 41: What are the considerations you use for extending hydrogen plant catalyst life cycles (i.e., lower production rates, furnace tube failure, etc.)?

There are many parameters affecting the hydrogen plant catalyst life cycles, such as lower production rates, furnace tube failure, unplanned plant shutdowns, larger catalyst volumes, elevated energy consumption, and finite ZnO/S (zinc oxide/sulfur) capacity. Lower Production Rates will obviously result in longer catalyst lifetime due to a lower gas velocity over the catalyst.
Read more

(2018) Question 4: What are the requirements for a unit depressurization valve in isom unit using a chlorided alumina catalyst based? Do you require the depressurization valve to be operable from the console and/or emergency shutdown device (ESD) panel?

Axens recommends that in cases of emergency depressurization of the reactor circuit, the circuit fluid is depressurized into the product stabilizer with the light gases still being treated in the off-gas caustic scrubber before being sent to flare.
Read more

(2018) Question 6: What are the catalyst or design considerations that you employ to repurpose isom units for other services, or to repurpose another type of unit into an isom unit?

With increasing quantities of lower octane naphthas reaching the gasoline pool and potential for higher octane demand in the finished stocks, the octane boost from isomerization units has grown in importance. While the installation of new units is ideal, many refineries have been looking at utilizing idled units or converting existing units to isomerization type operation.
Read more