Q&A

(2018) Question 44: Describe your procedures for placing and operating the FCC in hot standby/safe park mode. What safety concerns do you consider and what safeguards should be in place?

If the air blower is not running, things you should consider are ensuring all ignition sources are shutdown, bypassed or isolated (ESP, torch oil, DFAH, CO Boiler). Verify all hydrocarbon sources to the reactor, riser and regenerator are closed (fresh feed, any recycles, torch oil, fuel gas purges, LCO quench, etc.) and all sources of air are not being injected (main air, plant instrument air, fluffing air, etc.).

(2018) Question 45: What are the safe and reliable options for rodding out plugged bleeders such as hydraulic ram pumps, packing gland / drill assemblies or tangential bleeders? How are these options used in a best practice for ensuring piping is hydrocarbon free and ready for maintenance?

Rod out tools or bleeder cleaners are safe and effective at clearing clogged drain, vent and instrument valves to be cleaned during normal operations. Most include some type of drill bit and local pressure gauge and are designed to handle high temperature and pressure applications.

(2017) Question 3: What are your Best Practices for unloading solid phosphoric acid (SPA) catalyst from a catalytic polymerization unit, and what safety issues do they address?

There are two types of Honeywell UOP Cat Poly reactors: chamber and tubular. Each has different unloading concerns, and there are several different unloading options available for each.

(2017) Question 4: For the isomerization unit, what is your treatment for the streams containing high concentrations of hydrochloric acid (HCl) in the reactor emergency depressurization system?

Honeywell UOP does not include treatment of gas from the reactor effluent as it enters the flare header when using the emergency depressuring system in our Penex™ and Butamer™ process unit designs.

(2017) Question 5: Is the presence of pyrophoric compounds common in feed/effluent exchangers? What neutralization methods do you employ prior to exposing the equipment to the atmosphere?

In 2015, UOP led a Principles & Practices session on the topic of NHT (naphtha hydrotreater) and reforming unit feed/effluent exchanger fouling and cleaning.

(2010) Question 35: What experiences do the panelists have with naphtha hydrotreater combined feed exchanger fouling? How do you monitor fouling in this exchanger service?

Feed side fouling of the NHT feed/effluent exchanger can be attributable to polymerization of olefins or diolefins. Storage of unsaturated materials from the Coker/FCC/Visbreaker may exacerbate the problem with the introduction of oxygen as a free radical that can promote polymerization.

(2010) Question 36: What are the best practices for maximizing catalyst run length in NHT units that are limited by reactor pressure drop?

Marathon’s experience with NHT fouling has been primarily corrosion products from upstream units and oxygen related polymerization of the naphtha. The use of feed filters can help minimize the effects of corrosion products. Oxygen related polymerization has impacted our NHT units from air leakage across intermediate naphtha storage tank seals and in purchased naphtha.

(2010) Question 37: Silicon poisoning of NHT catalysts has been observed in refineries without coking units. In your experience, what are the potential sources of silicon and what are the best practices to manage risk of such poisoning?

Marathon has had to deal with issues of non-coker silicon in naphtha’s since at least 2001. For background purposes, it is Marathon’s experience that silicon blocks the pores on hydrotreating catalyst and can impact catalyst activity. In severe cases, silicon breaks through to the reforming catalyst can occur where it can form silicon dioxide during the regeneration process which can cover the platinum sites.

(2008) Question 70: How frequently do you have fires on reformer reactor flanges? What bolting techniques and gasket types do you use to prevent leaks? What other fixes, such as flange resurfacing, have you employed? Do you use steam ri

GRUBB (Chevron USA, Inc.) Chevron has had some experience with flange fires in the past, so I’ve consulted with Dave Reeves, our corporate expert and also our Best Practice that we’ve developed for this. I know that I said temporary fixes up on the slide, but it’s not really a temporary fix.

(2008) Question 71 Is your company planning to install modified HF acid capability (usage of the volatility suppressing additive)? What are the incentives for doing this? What alternatives have you considered?

METKA (Sunoco, Inc.) In March 2006, in our continuing effort to support safe, reliable, and environmentally sound operation, we announced our plans to apply for a permit to independently initiate an alkylation process improvement project in our Philadelphia HF alkylation unit.

Find the answer to your technical question in AFPM's extensive Q&A database.

Q&A