Q&A

On-the-fly catalyst replacements are becoming more common, but still an economic decision for the refiner based on trade-offs between the continuous replacement approach and the historical changing at turnaround approach. On-the-fly catalyst replacement allows for full catalyst replacement while catalyst circulation is maintained, with both reaction and regeneration sections still in operation to allow for reduced unit downtime.

As a first step and low investment solution, refiners will perform a visual check on the color of tubes to check for color differences or perform a thermal scan of the tubes. These solutions are not very accurate due to iron scale formation and ceramic coating on the tubes.

The recycle compressor is water washed at every catalyst regeneration (typically once per year) after the chlorination step. In addition, if there is any extended outage for mechanical work, the compressor will be water washed anytime there is an opportunity to do so as precaution.

10% ethanol in gasoline regulation which lowered the gasoline octane required from the refinery.  At 10% blending ethanol raises the (R+M)/2 octane of regular gasoline about 2 numbers. 

ABIGAIL SLATER (HollyFrontier)
Salting typically occurs in the reactor effluent exchangers (shell and tube and fin fans), recycle and net gas compressors, and product stabilizer overhead system (top trays, overhead condenser, etc.). Common monitoring practices on exchangers and fin fans can be

DAVINDER MITTAL (HPCL Mittal Energy)
Chlorides have been a long standing issue in catalytic reformer operation. Until a few years ago, the focus on preventing operational problems from the chloride compounds in the catalytic reformer product stream was to remove HCl.  More recently, a growing

BILL KOSTKA (AXENS NORTH AMERICA)
Metal-catalyzed coke (MCC) formation typically occurs on 3d valence transition metals such as iron and nickel.  Under CCR-like conditions of low hydrogen partial pressure (less than about 620 kpa), high temperature (more than about 480 °C) and low or stagnant flow

BILL KOSTKA (AXENS NORTH AMERICA)
Liquid-phase Cl treaters are typically used in three locations for reforming units.

Treating the unstabilzed reformate stream provides several advantages.  The stream is heated upstream of the stabilizer column which ensures that any ammonium chloride is

ABIGAIL SLATER (HollyFrontier)
The most impactful parameter affecting alky acid consumption is feed quality. Reducing feed contamination will greatly reduce acid consumption. There are also operational changes that can be made to reduce acid consumption, but the biggest impact will be feed

KAISER (Delek Refining Ltd.) The question is very well phrased in that the introduction of ethanol into the blend pool does tend to reduce the need to run the isomerization unit in that ethanol is a very high RVP blend component, and it has enough octane to be able to possibly offset the need for the octane boost that you’re getting out of your isomerization unit. So when a refiner wants to introduce the ethanol into their blend pool, there are three likely scenarios that they’ll go through in their unit operations. The first is obviously shut the isomerization unit down.