Filters

(2010) Question 71: For the main column, "tri lines" can be utilized to monitor bottoms level. When other level instruments are being verified or have failed, what are the best operating and safety practices being employed to verify the level? What do refiners use to monitor and control level in the bottom of the main column?

For the main column, "tri lines" can be utilized to monitor bottoms level. When other level instruments are being verified or have failed, what are the best operating and safety practices being employed to verify the level? What do refiners use to monitor and control level in the bottom of the main column?
Read more

(2010) Question 72: With advance controls on the FCCU and gas plants, what are refiners doing to train new operators and keep their experienced operators sharp and ready to handle FCCU upsets and emergencies? Are refiners using simulators to help with the training and retraining?

Sunoco employs Dynamic Matrix Control (DMC) on all the FCC gas plants and DMC on reactor and regenerator systems. One FCC has a complete process training simulator, and we are in the process of installing simulators on all of our FCC’s.
Read more

(2010) Question 73: What levels of distillate boiling range material do you include in the FCC feeds? Discuss the yield and heat balance implications of varying the feed distillate content. What equipment/technology options do you employ to minimize the distillate levels

There are several examples of how yield data can be used to identify hardware issues in the FCCU. For example, a decrease in cat to oil and/or catalyst circulation (which leads to a decrease in overall conversion and liquid yield) can be the result of a high regenerator dense bed temperature at constant process conditions. Several mechanical/hardware issues can contribute to higher regenerator temperatures.
Read more

(2008) Question 81: Has the optimum feed for light naphtha isomerization units changed given that: 1) ethanol blending reduces the octane value of other blendstocks; 2) the demand for premium gasoline is down; and, 3) ethanol blending increases RVP compliance costs? Are you removing pentane from the isomerization unit feed stream or shutting down the unit? Or, are the units still valuable for isomerizing normal hexane and saturating benzene?

KAISER (Delek Refining Ltd.) The question is very well phrased in that the introduction of ethanol into the blend pool does tend to reduce the need to run the isomerization unit in that ethanol is a very high RVP blend component, and it has enough octane to be able to possibly offset the need for the octane boost that you’re getting out of your isomerization unit. So when a refiner wants to introduce the ethanol into their blend pool, there are three likely scenarios that they’ll go through in their unit operations. The first is obviously shut the isomerization unit down.
Read more