Q&A

(2018) Question 45: What are the safe and reliable options for rodding out plugged bleeders such as hydraulic ram pumps, packing gland / drill assemblies or tangential bleeders? How are these options used in a best practice for ensuring piping is hydrocarbon free and ready for maintenance?

Rod out tools or bleeder cleaners are safe and effective at clearing clogged drain, vent and instrument valves to be cleaned during normal operations. Most include some type of drill bit and local pressure gauge and are designed to handle high temperature and pressure applications.

(2017) Question 3: What are your Best Practices for unloading solid phosphoric acid (SPA) catalyst from a catalytic polymerization unit, and what safety issues do they address?

There are two types of Honeywell UOP Cat Poly reactors: chamber and tubular. Each has different unloading concerns, and there are several different unloading options available for each.

(2017) Question 4: For the isomerization unit, what is your treatment for the streams containing high concentrations of hydrochloric acid (HCl) in the reactor emergency depressurization system?

Honeywell UOP does not include treatment of gas from the reactor effluent as it enters the flare header when using the emergency depressuring system in our Penex™ and Butamer™ process unit designs.

(2017) Question 5: Is the presence of pyrophoric compounds common in feed/effluent exchangers? What neutralization methods do you employ prior to exposing the equipment to the atmosphere?

In 2015, UOP led a Principles & Practices session on the topic of NHT (naphtha hydrotreater) and reforming unit feed/effluent exchanger fouling and cleaning.

(2010) Question 30: What process parameters can affect alkylate T90? What are the critical variables you monitor in both sulfuric and HF units? Discuss processing schemes, feed impacts and operating variables.

The type of feed is very significant for T90. Amylenes make alkylate with higher T90 in both sulfuric and HF units. Propylene generally makes lower T90 than butylene in HF units. However, with sulfuric-catalyzed technologies, propylene can increase T90 as discussed below.

(2010) Question 31: In your experience, when sampling the HF Alky iso-recycle stream, how and where is the sample neutralized prior to analysis? Can this approach be used for online GC analysis as well?

The isobutane recycle sample can be neutralized at the sample location using a chamber filled with alumina or KOH pellets. If using a KOH chamber, it is best to add a filter downstream to filter out any fines.

(2010) Question 32: In your experience, what contributes to Monel denickelification in the HF Acid Regenerator circuit? What are the potential problems associated with this?

Oxygen is a major cause of monel denickelfication. Oxygen can enter the circuit during loading operations. Care should be taken to avoid pressuring air contained within loading pipes/hoses into the unit.

(2010) Question 33: How do refiners avoid De-isobutanizer (DIB) column/reboiler fouling in sulfuric acid alkylation? What process conditions on the column do you use to detect this fouling? What process modifications do you take to minimize the impact of this fouling?

Fouling in the DIB column is almost always caused by salt deposits. These salts are typically sodium sulfate and sodium sulfite but can also contain calcium or magnesium if the effluent treating water is not demineralized. If these water-soluble salts are present in the DIB feed, the water will evaporate once inside the column leaving the solids behind.

(2008) Question 70: How frequently do you have fires on reformer reactor flanges? What bolting techniques and gasket types do you use to prevent leaks? What other fixes, such as flange resurfacing, have you employed? Do you use steam ri

GRUBB (Chevron USA, Inc.) Chevron has had some experience with flange fires in the past, so I’ve consulted with Dave Reeves, our corporate expert and also our Best Practice that we’ve developed for this. I know that I said temporary fixes up on the slide, but it’s not really a temporary fix.

(2008) Question 71 Is your company planning to install modified HF acid capability (usage of the volatility suppressing additive)? What are the incentives for doing this? What alternatives have you considered?

METKA (Sunoco, Inc.) In March 2006, in our continuing effort to support safe, reliable, and environmentally sound operation, we announced our plans to apply for a permit to independently initiate an alkylation process improvement project in our Philadelphia HF alkylation unit.

Find the answer to your technical question in AFPM's extensive Q&A database.

Q&A