Q&A

These digital transcripts are meant to share information on process safety practices in order to help improve process safety performance and awareness throughout industry. The goal is to capture and share knowledge that could be used by other companies or sites when developing new process safety practices or improving existing ones. The documents being shared have been used by an industry member, but this does not mean it should be used or that it will produce similar results at any other site. Rather, it is an option to consider when implementing or adjusting programs and practices at a site.

BY THEMSELVES, THESE DIGITAL TRANSCRIPTS ARE NOT STANDARDS OR RECOMMENDED PRACTICES. THEY ARE NOT INTENDED TO REPLACE SOUND ENGINEERING JUDGMENT. THEY DO NOT PRECLUDE THE USE OF ALTERNATIVE METHODS THAT COMPLY WITH LEGAL REQUIREMENTS. A SUBJECT MATTER EXPERT SHOULD BE CONSULTED PRIOR TO DETERMINING WHETHER A PRACTICE CAN BE USED IN ANY SPECIFIC SITUATION.

(2010) Question 23: The liquid recycle rate to a second stage of a hydrocracker can shift conversion, light end yields, cycle length and/or the required temperature to achieve a desired conversion. What strategies do you employ to reach optimum conditions

In two-stage hydrocracking design there are several variables that need to be balanced for optimum performance. Desired product yields or selectivity can be affected by conversion per pass in each stage. Lower conversion per pass is desirable to maximize heavier product selectivity.

(2010) Question 25: Besides high reactor temperatures and flow maldistribution, what are other causes of high gas and LPG yields in a hydrocracker have you experienced?

Hydrocrackers typically process heavy gas oils into distillate-range material. The gas oils are catalytically cracked at high pressures in the presence of hydrocracking catalyst and hydrogen. The reaction is exothermic and consumes a relatively large quantity of hydrogen. High gas and LPG yields would be generally undesirable in a properly operating hydrocracker.

Q&A

Find the answer to your technical question in AFPM's extensive Q&A database.

Q&A

(2010) Question 23: The liquid recycle rate to a second stage of a hydrocracker can shift conversion, light end yields, cycle length and/or the required temperature to achieve a desired conversion. What strategies do you employ to reach optimum conditions

(2010) Question 25: Besides high reactor temperatures and flow maldistribution, what are other causes of high gas and LPG yields in a hydrocracker have you experienced?