Filters

(2008) Question 97: What technologies and adsorbents are you using for net hydrogen off gas chloride traps and what operating problems have you experienced? What are the criteria for changing out the adsorbents and how often are the beds changed?

Question 97: What technologies and adsorbents are you using for net hydrogen off gas chloride traps and what operating problems have you experienced? What are the criteria for changing out the adsorbents and how often are the beds changed? Javier Quintana (Valero Energy) There are various adsorbents available for effective chloride treating of the hydrogen-rich net gas stream, including activated aluminas, promoted aluminas, and zeolites. Valero has moved away from the alumina products towards a best practice of using the zeolite products, not only for reasons of cost per quantity of chloride removed, but also for ease of changeout and completeness of chloride removal.
Read more

(2008) Question 98: What metallurgy are you using for mesh pads in reformer compressor suction knockout drums? How often are the mesh pads inspected and how often are they replaced? Are the same criteria used for mesh pads in product separators?

Question 98 What metallurgy are you using for mesh pads in reformer compressor suction knockout drums? How often are the mesh pads inspected and how often are they replaced? Are the same criteria used for mesh pads in product separators? Rick Grubb (Chevron USA) We typically use 304 SS demister pads in the refinery and inspect them every 10 years. In reforming service we have been using Tefzel demister pads and have been replacing them approximately every dump and screen due to separator internal inspections. If we go into the vessel we go ahead and inspect the mesh pad, but assume before opening the vessel that the pad will need replacing. The Tefzel pads have greatly increased the reliability such that we don’t find mesh pad pieces in the compressors anymore. We have been contemplating using co-knit pads (synthetic fiber inter-woven with a SS fiber), but have not done so yet.
Read more